--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/perl-5.22.2/win32/Makefile	Sat May 14 14:54:38 2016 +0000
@@ -0,0 +1,1424 @@
+#
+# Makefile to build perl on Windows using Microsoft NMAKE.
+# Supported compilers:
+#	Microsoft Visual C++ 6.0 or later
+#	Windows SDK 64-bit compiler and tools
+#
+# This is set up to build a perl.exe that runs off a shared library
+# (perl522.dll).  Also makes individual DLLs for the XS extensions.
+#
+
+##
+## Make sure you read README.win32 *before* you mess with anything here!
+##
+
+##
+## Build configuration.  Edit the values below to suit your needs.
+##
+
+#
+# Set these to wherever you want "nmake install" to put your
+# newly built perl.
+#
+INST_DRV	= c:
+INST_TOP	= $(INST_DRV)\perl
+
+#
+# Uncomment if you want to build a 32-bit Perl using a 32-bit compiler
+# on a 64-bit version of Windows.
+#
+#WIN64		= undef
+
+#
+# Comment this out if you DON'T want your perl installation to be versioned.
+# This means that the new installation will overwrite any files from the
+# old installation at the same INST_TOP location.  Leaving it enabled is
+# the safest route, as perl adds the extra version directory to all the
+# locations it installs files to.  If you disable it, an alternative
+# versioned installation can be obtained by setting INST_TOP above to a
+# path that includes an arbitrary version string.
+#
+#INST_VER	= \5.22.2
+
+#
+# Comment this out if you DON'T want your perl installation to have
+# architecture specific components.  This means that architecture-
+# specific files will be installed along with the architecture-neutral
+# files.  Leaving it enabled is safer and more flexible, in case you
+# want to build multiple flavors of perl and install them together in
+# the same location.  Commenting it out gives you a simpler
+# installation that is easier to understand for beginners.
+#
+#INST_ARCH	= \$(ARCHNAME)
+
+#
+# Uncomment this if you want perl to run
+# 	$Config{sitelibexp}\sitecustomize.pl
+# before anything else.  This script can then be set up, for example,
+# to add additional entries to @INC.
+#
+#USE_SITECUST	= define
+
+#
+# uncomment to enable multiple interpreters.  This is needed for fork()
+# emulation and for thread support, and is auto-enabled by USE_IMP_SYS
+# and USE_ITHREADS below.
+#
+USE_MULTI	= define
+
+#
+# Interpreter cloning/threads; now reasonably complete.
+# This should be enabled to get the fork() emulation.  This needs (and
+# will auto-enable) USE_MULTI above.
+#
+USE_ITHREADS	= define
+
+#
+# uncomment to enable the implicit "host" layer for all system calls
+# made by perl.  This is also needed to get fork().  This needs (and
+# will auto-enable) USE_MULTI above.
+#
+USE_IMP_SYS	= define
+
+#
+# Comment this out if you don't want to enable large file support for
+# some reason.  Should normally only be changed to maintain compatibility
+# with an older release of perl.
+#
+USE_LARGE_FILES	= define
+
+#
+# Uncomment this if you're building a 32-bit perl and want 64-bit integers.
+# (If you're building a 64-bit perl then you will have 64-bit integers whether
+# or not this is uncommented.)
+# Note: This option is not supported in 32-bit MSVC60 builds.
+#
+#USE_64_BIT_INT	= define
+
+#
+# uncomment exactly one of the following
+#
+# Visual C++ 6.x (aka Visual C++ 98)
+CCTYPE		= MSVC60
+# Visual C++ .NET 2002/2003 (aka Visual C++ 7.x) (full version)
+#CCTYPE		= MSVC70
+# Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
+#CCTYPE		= MSVC70FREE
+# Windows Server 2003 SP1 Platform SDK (April 2005)
+#CCTYPE		= SDK2003SP1
+# Visual C++ 2005 (aka Visual C++ 8.x) (full version)
+#CCTYPE		= MSVC80
+# Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
+#CCTYPE		= MSVC80FREE
+# Visual C++ 2008 (aka Visual C++ 9.x) (full version)
+#CCTYPE		= MSVC90
+# Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
+#CCTYPE		= MSVC90FREE
+# Visual C++ 2010 (aka Visual C++ 10.x) (full version)
+#CCTYPE		= MSVC100
+# Visual C++ 2010 Express Edition (aka Visual C++ 10.x) (free version)
+#CCTYPE		= MSVC100FREE
+# Visual C++ 2012 (aka Visual C++ 11.x) (full version)
+#CCTYPE		= MSVC110
+# Visual C++ 2012 Express Edition (aka Visual C++ 11.x) (free version)
+#CCTYPE		= MSVC110FREE
+# Visual C++ 2013 (aka Visual C++ 12.x) (full version)
+#CCTYPE		= MSVC120
+# Visual C++ 2013 Express Edition (aka Visual C++ 12.x) (free version)
+#CCTYPE		= MSVC120FREE
+
+#
+# If you are using Intel C++ Compiler uncomment this
+#
+#__ICC		= define
+
+#
+# Uncomment this if you want to build everything in C++ mode
+#
+#USE_CPLUSPLUS	= define
+
+#
+# uncomment next line if you want debug version of perl (big/slow)
+# If not enabled, we automatically try to use maximum optimization
+# with all compilers that are known to have a working optimizer.
+#
+# You can also set CFG = DebugSymbols for a slightly smaller/faster
+# debug build without the special debugging code in perl which is
+# enabled via -DDEBUGGING;
+#
+# or you can set CFG = DebugFull for an even fuller (bigger/slower)
+# debug build using the debug version of the CRT, and enabling VC++
+# debug features such as extra assertions and invalid parameter warnings
+# in perl and CRT code via -D_DEBUG.  (Note that the invalid parameter
+# handler does get triggered from time to time in this configuration,
+# which causes warnings to be printed on STDERR, which in turn causes a
+# few tests to fail.)
+#
+#CFG		= Debug
+
+#
+# uncomment to enable linking with setargv.obj under the Visual C
+# compiler. Setting this options enables perl to expand wildcards in
+# arguments, but it may be harder to use alternate methods like
+# File::DosGlob that are more powerful.  This option is supported only with
+# Visual C.
+#
+#USE_SETARGV	= define
+
+#
+# set this if you wish to use perl's malloc
+# WARNING: Turning this on/off WILL break binary compatibility with extensions
+# you may have compiled with/without it.  Be prepared to recompile all
+# extensions if you change the default.  Currently, this cannot be enabled
+# if you ask for USE_IMP_SYS above.
+#
+#PERL_MALLOC	= define
+
+#
+# set this to enable debugging mstats
+# This must be enabled to use the Devel::Peek::mstat() function.  This cannot
+# be enabled without PERL_MALLOC as well.
+#
+#DEBUG_MSTATS	= define
+
+#
+# set this to additionally provide a statically linked perl-static.exe.
+# Note that dynamic loading will not work with this perl, so you must
+# include required modules statically using the STATIC_EXT or ALL_STATIC
+# variables below. A static library perl522s.lib will also be created.
+# Ordinary perl.exe is not affected by this option.
+#
+#BUILD_STATIC	= define
+
+#
+# in addition to BUILD_STATIC the option ALL_STATIC makes *every*
+# extension get statically built
+# This will result in a very large perl executable, but the main purpose
+# is to have proper linking set so as to be able to create miscellaneous
+# executables with different built-in extensions
+#
+#ALL_STATIC	= define
+
+#
+#
+# set the install locations of the compiler include/libraries
+# Running VCVARS32.BAT is *required* when using Visual C.
+# Some versions of Visual C don't define MSVCDIR in the environment,
+# so you may have to set CCHOME explicitly (spaces in the path name should
+# not be quoted)
+#
+CCHOME		= $(MSVCDIR)
+CCINCDIR	= $(CCHOME)\include
+CCLIBDIR	= $(CCHOME)\lib
+
+#
+# Additional compiler flags can be specified here.
+#
+BUILDOPT	= $(BUILDOPTEXTRA)
+
+#
+# This should normally be disabled.  Enabling it will disable the File::Glob
+# implementation of CORE::glob.
+#
+#BUILDOPT	= $(BUILDOPT) -DPERL_EXTERNAL_GLOB
+
+#
+# Perl needs to read scripts in text mode so that the DATA filehandle
+# works correctly with seek() and tell(), or around auto-flushes of
+# all filehandles (e.g. by system(), backticks, fork(), etc).
+#
+# The current version on the ByteLoader module on CPAN however only
+# works if scripts are read in binary mode.  But before you disable text
+# mode script reading (and break some DATA filehandle functionality)
+# please check first if an updated ByteLoader isn't available on CPAN.
+#
+BUILDOPT	= $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
+
+#
+# specify semicolon-separated list of extra directories that modules will
+# look for libraries (spaces in path names need not be quoted)
+#
+EXTRALIBDIRS	=
+
+#
+# set this to your email address (perl will guess a value from
+# from your loginname and your hostname, which may not be right)
+#
+#EMAIL		=
+
+##
+## Build configuration ends.
+##
+
+##################### CHANGE THESE ONLY IF YOU MUST #####################
+
+!IF "$(USE_IMP_SYS)" == "define"
+PERL_MALLOC	= undef
+DEBUG_MSTATS	= undef
+!ENDIF
+
+!IF "$(PERL_MALLOC)" == ""
+PERL_MALLOC	= undef
+DEBUG_MSTATS	= undef
+!ENDIF
+
+!IF "$(DEBUG_MSTATS)" == ""
+DEBUG_MSTATS	= undef
+!ENDIF
+
+!IF "$(DEBUG_MSTATS)" == "define"
+BUILDOPT	= $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
+!ENDIF
+
+!IF "$(USE_SITECUST)" == ""
+USE_SITECUST	= undef
+!ENDIF
+
+!IF "$(USE_MULTI)" == ""
+USE_MULTI	= undef
+!ENDIF
+
+!IF "$(USE_ITHREADS)" == ""
+USE_ITHREADS	= undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" == ""
+USE_IMP_SYS	= undef
+!ENDIF
+
+!IF "$(USE_LARGE_FILES)" == ""
+USE_LARGE_FILES	= undef
+!ENDIF
+
+!IF "$(USE_64_BIT_INT)" == ""
+USE_64_BIT_INT	= undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
+USE_MULTI	= define
+!ENDIF
+
+!IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
+USE_MULTI	= define
+!ENDIF
+
+!IF "$(USE_SITECUST)" == "define"
+BUILDOPT	= $(BUILDOPT) -DUSE_SITECUSTOMIZE
+!ENDIF
+
+!IF "$(USE_MULTI)" != "undef"
+BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" != "undef"
+BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_SYS
+!ENDIF
+
+!IF "$(PROCESSOR_ARCHITECTURE)" == ""
+PROCESSOR_ARCHITECTURE	= x86
+!ENDIF
+
+!IF "$(WIN64)" == ""
+# When we are running from a 32bit cmd.exe on AMD64 then
+# PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
+# is set to AMD64
+!IF "$(PROCESSOR_ARCHITEW6432)" != ""
+PROCESSOR_ARCHITECTURE	= $(PROCESSOR_ARCHITEW6432)
+WIN64			= define
+!ELSE
+!IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
+WIN64			= define
+!ELSE
+WIN64			= undef
+!ENDIF
+!ENDIF
+!ENDIF
+
+!IF "$(WIN64)" == "define"
+USE_64_BIT_INT	= define
+!ENDIF
+
+# Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because
+# both link against MSVCRT.dll (which is part of Windows itself) and
+# not against a compiler specific versioned runtime.
+!IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60"
+CCTYPE		= SDK2003SP1
+!ENDIF
+
+# Disable the 64-bit-int option for (32-bit) MSVC60 builds since that compiler
+# does not support it.
+!IF "$(CCTYPE)" == "MSVC60"
+!UNDEF USE_64_BIT_INT
+USE_64_BIT_INT	= undef
+!ENDIF
+
+# Most relevant compiler-specific options fall into two groups:
+# either pre-MSVC80 or MSVC80 onwards, so define a macro for this.
+!IF "$(CCTYPE)" == "MSVC60" || \
+    "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE"
+PREMSVC80	= define
+!ELSE
+PREMSVC80	= undef
+!ENDIF
+
+ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
+!IF "$(ARCHITECTURE)" == "AMD64"
+ARCHITECTURE	= x64
+!ENDIF
+!IF "$(ARCHITECTURE)" == "IA64"
+ARCHITECTURE	= ia64
+!ENDIF
+
+!IF "$(USE_MULTI)" == "define"
+ARCHNAME	= MSWin32-$(ARCHITECTURE)-multi
+!ELSE
+ARCHNAME	= MSWin32-$(ARCHITECTURE)-perlio
+!ENDIF
+
+!IF "$(USE_ITHREADS)" == "define"
+ARCHNAME	= $(ARCHNAME)-thread
+!ENDIF
+
+!IF "$(WIN64)" != "define"
+!IF "$(USE_64_BIT_INT)" == "define"
+ARCHNAME	= $(ARCHNAME)-64int
+!ENDIF
+!ENDIF
+
+# All but the free version of VC++ 7.x can load DLLs on demand.  Makes the test
+# suite run in about 10% less time.
+!IF "$(CCTYPE)" != "MSVC70FREE"
+DELAYLOAD	= -DELAYLOAD:ws2_32.dll delayimp.lib
+!ENDIF
+
+# Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
+# DLLs. These either need copying everywhere with the binaries, or else need
+# embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
+# simplicity, embed them if they exist (and delete them afterwards so that they
+# don't get installed too).
+EMBED_EXE_MANI	= if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
+		  if exist $@.manifest del $@.manifest
+EMBED_DLL_MANI	= if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
+		  if exist $@.manifest del $@.manifest
+
+ARCHDIR		= ..\lib\$(ARCHNAME)
+COREDIR		= ..\lib\CORE
+AUTODIR		= ..\lib\auto
+LIBDIR		= ..\lib
+EXTDIR		= ..\ext
+DISTDIR		= ..\dist
+CPANDIR		= ..\cpan
+PODDIR		= ..\pod
+HTMLDIR		= .\html
+
+#
+INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin
+INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)
+INST_LIB	= $(INST_TOP)$(INST_VER)\lib
+INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)
+INST_COREDIR	= $(INST_ARCHLIB)\CORE
+INST_HTML	= $(INST_TOP)$(INST_VER)\html
+
+#
+# Programs to compile, build .lib files and link
+#
+
+!IF "$(__ICC)" != "define"
+CC		= cl
+LINK32		= link
+!ELSE
+CC		= icl
+LINK32		= xilink
+!ENDIF
+LIB32		= $(LINK32) -lib
+RSC		= rc
+
+#
+# Options
+#
+
+INCLUDES	= -I$(COREDIR) -I.\include -I. -I..
+#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX
+DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT
+LOCDEFS		= -DPERLDLL -DPERL_CORE
+SUBSYS		= console
+CXX_FLAG	= -TP -EHsc
+
+LIBC		= msvcrt.lib
+
+!IF  "$(CFG)" == "Debug"
+OPTIMIZE	= -Od -MD -Zi -DDEBUGGING
+LINK_DBG	= -debug
+!ELSE
+!IF  "$(CFG)" == "DebugSymbols"
+OPTIMIZE	= -Od -MD -Zi
+LINK_DBG	= -debug
+!ELSE
+!IF  "$(CFG)" == "DebugFull"
+LIBC		= msvcrtd.lib
+OPTIMIZE	= -Od -MDd -Zi -D_DEBUG -DDEBUGGING
+LINK_DBG	= -debug
+!ELSE
+# -O1 yields smaller code, which turns out to be faster than -O2 on x86 and x64
+OPTIMIZE	= -O1 -MD -Zi -DNDEBUG
+# we enable debug symbols in release builds also
+LINK_DBG	= -debug -opt:ref,icf
+# you may want to enable this if you want COFF symbols in the executables
+# in addition to the PDB symbols.  The default Dr. Watson that ships with
+# Windows can use the the former but not latter.  The free WinDbg can be
+# installed to get better stack traces from just the PDB symbols, so we
+# avoid the bloat of COFF symbols by default.
+#LINK_DBG	= $(LINK_DBG) -debugtype:both
+!  IF "$(CCTYPE)" != "MSVC60"
+# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
+OPTIMIZE	= $(OPTIMIZE) -GL
+LINK_DBG	= $(LINK_DBG) -ltcg
+LIB_FLAGS	= -ltcg
+!  ENDIF
+!ENDIF
+!ENDIF
+!ENDIF
+
+!IF "$(WIN64)" == "define"
+DEFINES		= $(DEFINES) -DWIN64 -DCONSERVATIVE
+OPTIMIZE	= $(OPTIMIZE) -fp:precise
+!ENDIF
+
+# For now, silence warnings from VC++ 8.x onwards about "unsafe" CRT functions
+# and POSIX CRT function names being deprecated.
+!IF "$(PREMSVC80)" == "undef"
+DEFINES		= $(DEFINES) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
+!ENDIF
+
+# In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to
+# 64-bit, even in 32-bit mode.  It also provides the _USE_32BIT_TIME_T
+# preprocessor option to revert back to the old functionality for
+# backward compatibility.  We define this symbol here for older 32-bit
+# compilers only (which aren't using it at all) for the sole purpose
+# of getting it into $Config{ccflags}.  That way if someone builds
+# Perl itself with e.g. VC6 but later installs an XS module using VC8
+# the time_t types will still be compatible.
+!IF "$(WIN64)" == "undef"
+!  IF "$(PREMSVC80)" == "define"
+BUILDOPT	= $(BUILDOPT) -D_USE_32BIT_TIME_T
+!  ENDIF
+!ENDIF
+
+LIBBASEFILES	= \
+		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
+		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+		netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
+		version.lib odbc32.lib odbccp32.lib comctl32.lib
+
+# Avoid __intel_new_proc_init link error for libircmt.
+# libmmd is /MD equivelent, other variants exist.
+# libmmd is Intel C's math addon funcs to MS CRT, contains long doubles, C99,
+# and optimized C89 funcs
+!IF "$(__ICC)" == "define"
+LIBBASEFILES	= $(LIBBASEFILES) libircmt.lib libmmd.lib
+!ENDIF
+
+# The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which
+# doesn't include the buffer overrun verification code used by the /GS switch.
+# Since the code links against libraries that are compiled with /GS, this
+# "security cookie verification" code must be included via bufferoverflow.lib.
+!IF "$(WIN64)" == "define" && "$(CCTYPE)" == "SDK2003SP1"
+LIBBASEFILES    = $(LIBBASEFILES) bufferoverflowU.lib
+!ENDIF
+
+LIBFILES	= $(LIBBASEFILES) $(LIBC)
+
+#EXTRACFLAGS	= -nologo -GF -W4 -wd4127 -wd4706
+EXTRACFLAGS	= -nologo -GF -W3
+!IF "$(__ICC)" == "define"
+EXTRACFLAGS	= $(EXTRACFLAGS) -Qstd=c99
+!ENDIF
+!IF "$(USE_CPLUSPLUS)" == "define"
+EXTRACFLAGS	= $(EXTRACFLAGS) $(CXX_FLAG)
+!ENDIF
+CFLAGS		= $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+		$(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \
+		-libpath:"$(INST_COREDIR)" \
+		-machine:$(PROCESSOR_ARCHITECTURE)
+LIB_FLAGS	= $(LIB_FLAGS) -nologo
+OBJOUT_FLAG	= -Fo
+EXEOUT_FLAG	= -Fe
+
+CFLAGS_O	= $(CFLAGS) $(BUILDOPT)
+
+!IF "$(PREMSVC80)" == "undef"
+LINK_FLAGS	= $(LINK_FLAGS) "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
+!ELSE
+RSC_FLAGS	= -DINCLUDE_MANIFEST
+!ENDIF
+
+
+#################### do not edit below this line #######################
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+
+o = .obj
+
+#
+# Rules
+#
+
+#clear the list, we dont support .cxx .bas .cbl .for .pas .f .f90
+# .asm .cpp are not currently used but they are included for completeness
+.SUFFIXES :
+.SUFFIXES : .c $(o) .cpp .asm .dll .lib .exe .rc .res
+
+.c$(o):
+	$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
+
+.c.i:
+	$(CC) -c -I$(<D) $(CFLAGS_O) -P $(OBJOUT_FLAG)$@ $<
+
+.y.c:
+	$(NOOP)
+
+$(o).dll:
+	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
+	    -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
+	$(EMBED_DLL_MANI)
+
+.rc.res:
+	$(RSC) -i.. $(RSC_FLAGS) $<
+
+#
+# various targets
+
+# makedef.pl must be updated if this changes, and this should normally
+# only change when there is an incompatible revision of the public API.
+PERLIMPLIB	= ..\perl522.lib
+PERLSTATICLIB	= ..\perl522s.lib
+PERLDLL		= ..\perl522.dll
+
+MINIPERL	= ..\miniperl.exe
+MINIDIR		= .\mini
+PERLEXE		= ..\perl.exe
+WPERLEXE	= ..\wperl.exe
+PERLEXESTATIC	= ..\perl-static.exe
+GLOBEXE		= ..\perlglob.exe
+CONFIGPM	= ..\lib\Config.pm ..\lib\Config_heavy.pl
+GENUUDMAP	= ..\generate_uudmap.exe
+!IF "$(BUILD_STATIC)" == "define" || "$(ALL_STATIC)" == "define"
+PERLSTATIC	= static
+!ELSE
+PERLSTATIC	= 
+!ENDIF
+
+# Unicode data files generated by mktables
+FIRSTUNIFILE     = ..\lib\unicore\Decomposition.pl
+UNIDATAFILES	 = ..\lib\unicore\Decomposition.pl \
+		   ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
+		   ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst     \
+		   ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm            \
+		   ..\lib\unicore\TestProp.pl
+
+# Directories of Unicode data files generated by mktables
+UNIDATADIR1	= ..\lib\unicore\To
+UNIDATADIR2	= ..\lib\unicore\lib
+
+PERLEXE_MANIFEST= .\perlexe.manifest
+PERLEXE_ICO	= .\perlexe.ico
+PERLEXE_RES	= .\perlexe.res
+PERLDLL_RES	=
+
+# Nominate a target which causes extensions to be re-built
+# This used to be $(PERLEXE), but at worst it is the .dll that they depend
+# on and really only the interface - i.e. the .def file used to export symbols
+# from the .dll
+PERLDEP		= perldll.def
+
+PL2BAT		= bin\pl2bat.pl
+GLOBBAT		= bin\perlglob.bat
+
+UTILS		=			\
+		..\utils\h2ph		\
+		..\utils\splain		\
+		..\utils\perlbug	\
+		..\utils\pl2pm 		\
+		..\utils\c2ph		\
+		..\utils\pstruct	\
+		..\utils\h2xs		\
+		..\utils\perldoc	\
+		..\utils\perlivp	\
+		..\utils\libnetcfg	\
+		..\utils\enc2xs		\
+		..\utils\encguess		\
+		..\utils\piconv		\
+		..\utils\corelist	\
+		..\utils\cpan		\
+		..\utils\xsubpp		\
+		..\utils\prove		\
+		..\utils\ptar		\
+		..\utils\ptardiff	\
+		..\utils\ptargrep	\
+		..\utils\zipdetails	\
+		..\utils\shasum		\
+		..\utils\instmodsh	\
+		..\utils\json_pp	\
+		..\utils\pod2html	\
+		bin\exetype.pl		\
+		bin\runperl.pl		\
+		bin\pl2bat.pl		\
+		bin\perlglob.pl		\
+		bin\search.pl
+
+MAKE		= nmake -nologo
+MAKE_BARE	= nmake
+
+CFGSH_TMPL	= config.vc
+CFGH_TMPL	= config_H.vc
+
+XCOPY		= xcopy /f /r /i /d /y
+RCOPY		= xcopy /f /r /i /e /d /y
+NOOP		= @rem
+NULL		=
+
+DEL		= del
+
+MICROCORE_SRC	=		\
+		..\av.c		\
+		..\caretx.c	\
+		..\deb.c	\
+		..\doio.c	\
+		..\doop.c	\
+		..\dump.c	\
+		..\globals.c	\
+		..\gv.c		\
+		..\mro_core.c	\
+		..\hv.c		\
+		..\locale.c	\
+		..\keywords.c	\
+		..\mathoms.c    \
+		..\mg.c		\
+		..\numeric.c	\
+		..\op.c		\
+		..\pad.c	\
+		..\perl.c	\
+		..\perlapi.c	\
+		..\perly.c	\
+		..\pp.c		\
+		..\pp_ctl.c	\
+		..\pp_hot.c	\
+		..\pp_pack.c	\
+		..\pp_sort.c	\
+		..\pp_sys.c	\
+		..\reentr.c	\
+		..\regcomp.c	\
+		..\regexec.c	\
+		..\run.c	\
+		..\scope.c	\
+		..\sv.c		\
+		..\taint.c	\
+		..\toke.c	\
+		..\universal.c	\
+		..\utf8.c	\
+		..\util.c
+
+EXTRACORE_SRC	= $(EXTRACORE_SRC) perllib.c
+
+!IF "$(PERL_MALLOC)" == "define"
+EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\malloc.c
+!ENDIF
+
+EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\perlio.c
+
+WIN32_SRC	=		\
+		.\win32.c	\
+		.\win32io.c	\
+		.\win32sck.c	\
+		.\win32thread.c	\
+		.\fcrypt.c
+
+CORE_NOCFG_H	=		\
+		..\av.h		\
+		..\cop.h	\
+		..\cv.h		\
+		..\dosish.h	\
+		..\embed.h	\
+		..\form.h	\
+		..\gv.h		\
+		..\handy.h	\
+		..\hv.h		\
+		..\hv_func.h	\
+		..\iperlsys.h	\
+		..\mg.h		\
+		..\nostdio.h	\
+		..\op.h		\
+		..\opcode.h	\
+		..\perl.h	\
+		..\perlapi.h	\
+		..\perlsdio.h	\
+		..\perly.h	\
+		..\pp.h		\
+		..\proto.h	\
+		..\regcomp.h	\
+		..\regexp.h	\
+		..\scope.h	\
+		..\sv.h		\
+		..\thread.h	\
+		..\unixish.h	\
+		..\utf8.h	\
+		..\util.h	\
+		..\warnings.h	\
+		..\XSUB.h	\
+		..\EXTERN.h	\
+		..\perlvars.h	\
+		..\intrpvar.h	\
+		.\include\dirent.h	\
+		.\include\netdb.h	\
+		.\include\sys\errno2.h	\
+		.\include\sys\socket.h	\
+		.\win32.h
+
+CORE_H		= $(CORE_NOCFG_H) .\config.h ..\git_version.h
+
+UUDMAP_H	= ..\uudmap.h
+BITCOUNT_H	= ..\bitcount.h
+MG_DATA_H	= ..\mg_data.h
+GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
+
+MICROCORE_OBJ	= $(MICROCORE_SRC:.c=.obj)
+CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
+WIN32_OBJ	= $(WIN32_SRC:.c=.obj)
+MINICORE_OBJ	= $(MICROCORE_OBJ:..\=.\mini\)	\
+		  $(MINIDIR)\miniperlmain$(o)	\
+		  $(MINIDIR)\perlio$(o)
+MINIWIN32_OBJ	= $(WIN32_OBJ:.\=.\mini\)
+MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
+DLL_OBJ		= $(DYNALOADER)
+GENUUDMAP_OBJ	= $(GENUUDMAP:.exe=.obj)
+
+PERLDLL_OBJ	= $(CORE_OBJ)
+PERLEXE_OBJ	= perlmain$(o)
+PERLEXEST_OBJ	= perlmainst$(o)
+
+PERLDLL_OBJ	= $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+
+!IF "$(USE_SETARGV)" != ""
+SETARGV_OBJ	= setargv$(o)
+!ENDIF
+
+!IF "$(ALL_STATIC)" == "define"
+# some exclusions, unfortunately, until fixed:
+#  - MakeMaker isn't capable enough for SDBM_File (small bug)
+STATIC_EXT	= * !SDBM_File
+!ELSE
+# specify static extensions here, for example:
+# (be sure to include Win32CORE to load Win32 on demand)
+#STATIC_EXT	= Win32CORE Cwd Compress/Raw/Zlib
+STATIC_EXT	= Win32CORE
+!ENDIF
+
+DYNALOADER	= ..\DynaLoader$(o)
+
+CFG_VARS	=					\
+		"INST_TOP=$(INST_TOP)"			\
+		"INST_VER=$(INST_VER)"			\
+		"INST_ARCH=$(INST_ARCH)"		\
+		"archname=$(ARCHNAME)"			\
+		"cc=$(CC)"				\
+		"ld=$(LINK32)"				\
+		"ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)"	\
+		"usecplusplus=$(USE_CPLUSPLUS)"		\
+		"cf_email=$(EMAIL)"	 		\
+		"d_mymalloc=$(PERL_MALLOC)"		\
+		"libs=$(LIBFILES)"			\
+		"incpath=$(CCINCDIR:"=\")"		\
+		"libperl=$(PERLIMPLIB:..\=)"		\
+		"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")"	\
+		"libc=$(LIBC)"				\
+		"make=$(MAKE_BARE)"				\
+		"static_ext=$(STATIC_EXT)"		\
+		"usethreads=$(USE_ITHREADS)"		\
+		"useithreads=$(USE_ITHREADS)"		\
+		"usemultiplicity=$(USE_MULTI)"		\
+		"use64bitint=$(USE_64_BIT_INT)"		\
+		"uselongdouble=undef"			\
+		"uselargefiles=$(USE_LARGE_FILES)"	\
+		"usesitecustomize=$(USE_SITECUST)"	\
+		"LINK_FLAGS=$(LINK_FLAGS:"=\")"		\
+		"optimize=$(OPTIMIZE:"=\")"		\
+		"WIN64=$(WIN64)"
+
+#
+# Top targets
+#
+
+all : .\config.h ..\git_version.h $(GLOBEXE) $(CONFIGPM) \
+	$(UNIDATAFILES) MakePPPort $(PERLEXE) Extensions_nonxs Extensions $(PERLSTATIC)
+	@echo	Everything is up to date. '$(MAKE_BARE) test' to run test suite.
+
+regnodes : ..\regnodes.h
+
+..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
+
+..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
+
+reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(CONFIGPM) \
+	$(UNIDATAFILES) $(PERLEXE) Extensions_reonly
+	@echo	Perl and 're' are up to date.
+
+static: $(PERLEXESTATIC)
+
+#------------------------------------------------------------
+
+$(GLOBEXE) : perlglob$(o)
+	$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
+	    perlglob$(o) setargv$(o)
+	$(EMBED_EXE_MANI)
+
+perlglob$(o)  : perlglob.c
+
+config.w32 : $(CFGSH_TMPL)
+	copy $(CFGSH_TMPL) config.w32
+
+#
+# Copy the template config.h and set configurables at the end of it
+# as per the options chosen and compiler used.
+# Note: This config.h is only used to build miniperl.exe anyway, but
+# it's as well to have its options correct to be sure that it builds
+# and so that it's "-V" options are correct for use by makedef.pl. The
+# real config.h used to build perl.exe is generated from the top-level
+# config_h.SH by config_h.PL (run by miniperl.exe).
+#
+.\config.h : $(CFGH_TMPL)
+	-del /f config.h
+	copy $(CFGH_TMPL) config.h
+	@echo.>>$@
+	@echo #ifndef _config_h_footer_>>$@
+	@echo #define _config_h_footer_>>$@
+	@echo #undef Off_t>>$@
+	@echo #undef LSEEKSIZE>>$@
+	@echo #undef Off_t_size>>$@
+	@echo #undef PTRSIZE>>$@
+	@echo #undef SSize_t>>$@
+	@echo #undef HAS_ATOLL>>$@
+	@echo #undef HAS_STRTOLL>>$@
+	@echo #undef HAS_STRTOULL>>$@
+	@echo #undef IVTYPE>>$@
+	@echo #undef UVTYPE>>$@
+	@echo #undef IVSIZE>>$@
+	@echo #undef UVSIZE>>$@
+	@echo #undef NV_PRESERVES_UV>>$@
+	@echo #undef NV_PRESERVES_UV_BITS>>$@
+	@echo #undef IVdf>>$@
+	@echo #undef UVuf>>$@
+	@echo #undef UVof>>$@
+	@echo #undef UVxf>>$@
+	@echo #undef UVXf>>$@
+	@echo #undef USE_64_BIT_INT>>$@
+	@echo #undef Size_t_size>>$@
+	@echo #undef USE_CPLUSPLUS>>$@
+!IF "$(USE_LARGE_FILES)"=="define"
+	@echo #define Off_t __int64>>$@
+	@echo #define LSEEKSIZE ^8>>$@
+	@echo #define Off_t_size ^8>>$@
+!ELSE
+	@echo #define Off_t long>>$@
+	@echo #define LSEEKSIZE ^4>>$@
+	@echo #define Off_t_size ^4>>$@
+!ENDIF
+!IF "$(WIN64)"=="define"
+	@echo #define PTRSIZE ^8>>$@
+	@echo #define SSize_t __int64>>$@
+	@echo #define HAS_ATOLL>>$@
+	@echo #define HAS_STRTOLL>>$@
+	@echo #define HAS_STRTOULL>>$@
+	@echo #define Size_t_size ^8>>$@
+!ELSE
+	@echo #define PTRSIZE ^4>>$@
+	@echo #define SSize_t int>>$@
+	@echo #undef HAS_ATOLL>>$@
+	@echo #undef HAS_STRTOLL>>$@
+	@echo #undef HAS_STRTOULL>>$@
+	@echo #define Size_t_size ^4>>$@
+!ENDIF
+!IF "$(USE_64_BIT_INT)"=="define"
+	@echo #define IVTYPE __int64>>$@
+	@echo #define UVTYPE unsigned __int64>>$@
+	@echo #define IVSIZE ^8>>$@
+	@echo #define UVSIZE ^8>>$@
+	@echo #undef NV_PRESERVES_UV>>$@
+	@echo #define NV_PRESERVES_UV_BITS 53>>$@
+	@echo #define IVdf "I64d">>$@
+	@echo #define UVuf "I64u">>$@
+	@echo #define UVof "I64o">>$@
+	@echo #define UVxf "I64x">>$@
+	@echo #define UVXf "I64X">>$@
+	@echo #define USE_64_BIT_INT>>$@
+!ELSE
+	@echo #define IVTYPE long>>$@
+	@echo #define UVTYPE unsigned long>>$@
+	@echo #define IVSIZE ^4>>$@
+	@echo #define UVSIZE ^4>>$@
+	@echo #define NV_PRESERVES_UV>>$@
+	@echo #define NV_PRESERVES_UV_BITS 32>>$@
+	@echo #define IVdf "ld">>$@
+	@echo #define UVuf "lu">>$@
+	@echo #define UVof "lo">>$@
+	@echo #define UVxf "lx">>$@
+	@echo #define UVXf "lX">>$@
+	@echo #undef USE_64_BIT_INT>>$@
+!ENDIF
+!IF "$(USE_CPLUSPLUS)"=="define"
+	@echo #define USE_CPLUSPLUS>>$@
+!ELSE
+	@echo #undef USE_CPLUSPLUS>>$@
+!ENDIF
+	@echo #endif>>$@
+
+..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
+	cd .. && miniperl -Ilib make_patchnum.pl && cd win32
+
+# make sure that we recompile perl.c if the git version changes
+..\perl$(o) : ..\git_version.h
+
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
+	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
+
+# This target is for when changes to the main config.sh happen.
+# Edit config.vc, then make perl in a minimal configuration (i.e. with MULTI,
+# ITHREADS, IMP_SYS and LARGE_FILES off), then make this target
+# to regenerate config_H.vc.
+regen_config_h:
+	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
+	$(MINIPERL) -I..\lib ..\configpm --chdir=..
+	-del /f $(CFGH_TMPL)
+	-$(MINIPERL) -I..\lib config_h.PL
+	rename config.h $(CFGH_TMPL)
+
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL
+	$(MINIPERL) -I..\lib ..\configpm --chdir=..
+	$(XCOPY) ..\*.h $(COREDIR)\*.*
+	$(XCOPY) *.h $(COREDIR)\*.*
+	$(RCOPY) include $(COREDIR)\*.*
+	-$(MINIPERL) -I..\lib config_h.PL
+	if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
+
+# See the comment in Makefile.SH explaining this seemingly cranky ordering
+$(MINIPERL) : ..\lib\buildcustomize.pl 
+
+..\lib\buildcustomize.pl : $(MINIDIR) $(MINI_OBJ) ..\write_buildcustomize.pl
+	$(LINK32) -subsystem:console -out:$(MINIPERL) @<<
+	$(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(MINI_OBJ)
+<<
+	$(EMBED_EXE_MANI:..\lib\buildcustomize.pl=..\miniperl.exe)
+	$(MINIPERL) -I..\lib -f ..\write_buildcustomize.pl ..
+
+$(MINIDIR) :
+	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
+
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)
+	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c
+
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
+	$(CC) -c $(CFLAGS) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(*F).c
+
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
+!IF "$(USE_IMP_SYS)" == "define"
+perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h
+	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+!ENDIF
+
+# 1. we don't want to rebuild miniperl.exe when config.h changes
+# 2. we don't want to rebuild miniperl.exe with non-default config.h
+# 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
+$(MINI_OBJ)	: $(CORE_NOCFG_H)
+
+$(WIN32_OBJ)	: $(CORE_H)
+$(CORE_OBJ)	: $(CORE_H)
+$(DLL_OBJ)	: $(CORE_H)
+
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl
+	$(MINIPERL) -I..\lib create_perllibst_h.pl
+	$(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
+	    CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def
+
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
+	$(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
+		$(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
+<<
+	$(EMBED_DLL_MANI)
+	$(XCOPY) $(PERLIMPLIB) $(COREDIR)
+
+$(PERLSTATICLIB): Extensions_static
+	$(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<<
+		$(PERLDLL_OBJ)
+<<
+	$(XCOPY) $(PERLSTATICLIB) $(COREDIR)
+
+$(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
+
+$(MINIDIR)\globals$(o) : $(GENERATED_HEADERS)
+
+$(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H)
+
+$(BITCOUNT_H) : $(GENUUDMAP)
+	$(GENUUDMAP) $(GENERATED_HEADERS)
+
+$(GENUUDMAP_OBJ) : ..\mg_raw.h
+
+$(GENUUDMAP) : $(GENUUDMAP_OBJ)
+	$(LINK32) -subsystem:console -out:$@ @<<
+		$(LINK_FLAGS) $(LIBFILES) $(GENUUDMAP_OBJ)
+<<
+	$(EMBED_EXE_MANI)
+
+perlmain.c : runperl.c
+	copy runperl.c perlmain.c
+
+perlmain$(o) : perlmain.c
+	$(CC) $(CFLAGS_O:-DPERLDLL=-UPERLDLL) $(OBJOUT_FLAG)$@ -c perlmain.c
+
+perlmainst.c : runperl.c
+	copy runperl.c perlmainst.c
+
+perlmainst$(o) : perlmainst.c
+	$(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
+
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
+	$(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) \
+	    $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES) $(SETARGV_OBJ)
+	$(EMBED_EXE_MANI)
+	copy $(PERLEXE) $(WPERLEXE)
+	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
+
+$(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
+	$(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) \
+	    $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES) $(SETARGV_OBJ)
+	$(EMBED_EXE_MANI)
+
+MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
+	$(MINIPERL) -I..\lib ..\mkppport
+
+#-------------------------------------------------------------------------------
+# There's no direct way to mark a dependency on
+# DynaLoader.pm, so this will have to do
+Extensions: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
+	$(XCOPY) ..\*.h $(COREDIR)\*.*
+	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
+
+Extensions_reonly: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
+	$(XCOPY) ..\*.h $(COREDIR)\*.*
+	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
+
+Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
+	$(XCOPY) ..\*.h $(COREDIR)\*.*
+	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
+	$(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
+
+Extensions_nonxs: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) ..\pod\perlfunc.pod
+	$(XCOPY) ..\*.h $(COREDIR)\*.*
+	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
+
+$(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
+	$(XCOPY) ..\*.h $(COREDIR)\*.*
+	$(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
+
+Extensions_clean: 
+	-if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
+
+Extensions_realclean: 
+	-if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
+
+#-------------------------------------------------------------------------------
+
+doc: $(PERLEXE) ..\pod\perltoc.pod
+	$(PERLEXE) ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
+	    --podpath=pod:lib:utils --htmlroot="file://$(INST_HTML::=|)" \
+	    --recurse
+
+..\utils\Makefile: $(CONFIGPM) ..\utils\Makefile.PL
+	$(MINIPERL) -I..\lib ..\utils\Makefile.PL ..
+
+# Note that this next section is parsed (and regenerated) by pod/buildtoc
+# so please check that script before making structural changes here
+
+utils: $(PERLEXE) ..\utils\Makefile
+	cd ..\utils
+	$(MAKE) PERL=$(MINIPERL)
+	cd ..\pod
+	copy ..\README.aix      ..\pod\perlaix.pod
+	copy ..\README.amiga    ..\pod\perlamiga.pod
+	copy ..\README.android  ..\pod\perlandroid.pod
+	copy ..\README.bs2000   ..\pod\perlbs2000.pod
+	copy ..\README.ce       ..\pod\perlce.pod
+	copy ..\README.cn       ..\pod\perlcn.pod
+	copy ..\README.cygwin   ..\pod\perlcygwin.pod
+	copy ..\README.dos      ..\pod\perldos.pod
+	copy ..\README.freebsd  ..\pod\perlfreebsd.pod
+	copy ..\README.haiku    ..\pod\perlhaiku.pod
+	copy ..\README.hpux     ..\pod\perlhpux.pod
+	copy ..\README.hurd     ..\pod\perlhurd.pod
+	copy ..\README.irix     ..\pod\perlirix.pod
+	copy ..\README.jp       ..\pod\perljp.pod
+	copy ..\README.ko       ..\pod\perlko.pod
+	copy ..\README.linux    ..\pod\perllinux.pod
+	copy ..\README.macos    ..\pod\perlmacos.pod
+	copy ..\README.macosx   ..\pod\perlmacosx.pod
+	copy ..\README.netware  ..\pod\perlnetware.pod
+	copy ..\README.openbsd  ..\pod\perlopenbsd.pod
+	copy ..\README.os2      ..\pod\perlos2.pod
+	copy ..\README.os390    ..\pod\perlos390.pod
+	copy ..\README.os400    ..\pod\perlos400.pod
+	copy ..\README.plan9    ..\pod\perlplan9.pod
+	copy ..\README.qnx      ..\pod\perlqnx.pod
+	copy ..\README.riscos   ..\pod\perlriscos.pod
+	copy ..\README.solaris  ..\pod\perlsolaris.pod
+	copy ..\README.symbian  ..\pod\perlsymbian.pod
+	copy ..\README.synology ..\pod\perlsynology.pod
+	copy ..\README.tru64    ..\pod\perltru64.pod
+	copy ..\README.tw       ..\pod\perltw.pod
+	copy ..\README.vos      ..\pod\perlvos.pod
+	copy ..\README.win32    ..\pod\perlwin32.pod
+	copy ..\pod\perldelta.pod ..\pod\perl5222delta.pod
+	cd ..\win32
+	$(PERLEXE) $(PL2BAT) $(UTILS)
+	$(MINIPERL) -I..\lib ..\autodoc.pl ..
+	$(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..
+
+..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
+	$(PERLEXE) -f ..\pod\buildtoc -q
+
+# Note that the pod cleanup in this next section is parsed (and regenerated
+# by pod/buildtoc so please check that script before making changes here
+
+distclean: realclean
+	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
+		$(PERLIMPLIB) ..\miniperl.lib $(PERLEXESTATIC) $(PERLSTATICLIB)
+	-del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
+	-del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
+	-del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
+	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
+	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
+	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
+	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
+	-del /f $(LIBDIR)\File\Glob.pm
+	-del /f $(LIBDIR)\Storable.pm
+	-del /f $(LIBDIR)\Sys\Hostname.pm
+	-del /f $(LIBDIR)\Time\HiRes.pm
+	-del /f $(LIBDIR)\Unicode\Normalize.pm
+	-del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
+	-del /f $(LIBDIR)\Win32.pm
+	-del /f $(LIBDIR)\Win32CORE.pm
+	-del /f $(LIBDIR)\Win32API\File.pm
+	-del /f $(LIBDIR)\Win32API\File\cFile.pc
+	-del /f $(LIBDIR)\buildcustomize.pl
+	-del /f $(DISTDIR)\XSLoader\XSLoader.pm
+	-del /f *.def *.map
+	-if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
+	-if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
+	-if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
+	-if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
+	-if exist $(LIBDIR)\Carp rmdir /s /q $(LIBDIR)\Carp
+	-if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
+	-if exist $(LIBDIR)\Config\Perl rmdir /s /q $(LIBDIR)\Config\Perl
+	-if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
+	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
+	-if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
+	-if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
+	-if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
+	-if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
+	-if exist $(LIBDIR)\Exporter rmdir /s /q $(LIBDIR)\Exporter
+	-if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
+	-if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
+	-if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
+	-if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
+	-if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
+	-if exist $(LIBDIR)\ExtUtils\ParseXS rmdir /s /q $(LIBDIR)\ExtUtils\ParseXS
+	-if exist $(LIBDIR)\ExtUtils\Typemaps rmdir /s /q $(LIBDIR)\ExtUtils\Typemaps
+	-if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
+	-if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
+	-if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
+	-if exist $(LIBDIR)\HTTP rmdir /s /q $(LIBDIR)\HTTP
+	-if exist $(LIBDIR)\I18N rmdir /s /q $(LIBDIR)\I18N
+	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
+	-if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
+	-if exist $(LIBDIR)\JSON rmdir /s /q $(LIBDIR)\JSON
+	-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
+	-if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
+	-if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
+	-if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
+	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
+	-if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
+	-if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
+	-if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
+	-if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
+	-if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
+	-if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
+	-if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
+	-if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
+	-if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
+	-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
+	-if exist $(LIBDIR)\Search rmdir /s /q $(LIBDIR)\Search
+	-if exist $(LIBDIR)\Sub rmdir /s /q $(LIBDIR)\Sub
+	-if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
+	-if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
+	-if exist $(LIBDIR)\Term rmdir /s /q $(LIBDIR)\Term
+	-if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
+	-if exist $(LIBDIR)\Text rmdir /s /q $(LIBDIR)\Text
+	-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
+	-if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
+	-if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
+	-if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
+	-if exist $(LIBDIR)\Unicode\Collate\Locale rmdir /s /q $(LIBDIR)\Unicode\Collate\Locale
+	-if exist $(LIBDIR)\version rmdir /s /q $(LIBDIR)\version
+	-if exist $(LIBDIR)\VMS rmdir /s /q $(LIBDIR)\VMS
+	-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
+	-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
+	-cd $(PODDIR) && del /f *.html *.bat roffitall \
+	    perl5222delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
+	    perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
+	    perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
+	    perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
+	    perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \
+	    perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
+	    perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
+	    perlsolaris.pod perlsymbian.pod perlsynology.pod perltoc.pod \
+	    perltru64.pod perltw.pod perluniprops.pod perlvos.pod \
+	    perlwin32.pod
+	-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
+	    perldoc perlivp libnetcfg enc2xs encguess piconv cpan *.bat \
+	    xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist zipdetails
+	-del /f ..\config.sh perlmain.c dlutils.c config.h.new \
+	        perlmainst.c
+	-del /f $(CONFIGPM)
+	-del /f ..\lib\Config_git.pl
+	-del /f bin\*.bat
+	-del /f perllibst.h
+	-del /f $(PERLEXE_RES) perl.base
+	-cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h
+	-cd $(EXTDIR) && del /s *.def Makefile Makefile.old
+	-cd $(DISTDIR) && del /s *.def Makefile Makefile.old
+	-cd $(CPANDIR) && del /s *.def Makefile Makefile.old
+	-del /s ..\utils\Makefile
+	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
+	-if exist $(COREDIR) rmdir /s /q $(COREDIR)
+	-if exist pod2htmd.tmp del pod2htmd.tmp
+	-if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
+	-del /f ..\t\test_state
+
+install : all installbare installhtml
+
+installbare : utils ..\pod\perltoc.pod
+	$(PERLEXE) ..\installperl
+	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
+	if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
+	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
+	if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
+	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
+
+installhtml : doc
+	$(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
+
+inst_lib : $(CONFIGPM)
+	$(RCOPY) ..\lib $(INST_LIB)\*.*
+
+$(UNIDATAFILES) ..\pod\perluniprops.pod : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
+	cd ..\lib\unicore && \
+	..\$(MINIPERL) -I.. mktables -P ..\..\pod -maketest -makelist -p -check $@ $(FIRSTUNIFILE)
+
+minitest : .\config.h $(MINIPERL) ..\git_version.h $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES)
+	$(XCOPY) $(MINIPERL) ..\t\$(NULL)
+	if exist ..\t\perl.exe del /f ..\t\perl.exe
+	rename ..\t\miniperl.exe perl.exe
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+# Note this perl.exe is miniperl
+	cd ..\t && perl.exe TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t opbasic/*.t op/*.t uni/*.t perf/*.t pragma/*.t
+
+test-prep : all utils ../pod/perltoc.pod
+	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
+	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+	set PERL_STATIC_EXT=$(STATIC_EXT)
+
+test : test-prep
+	cd ..\t
+	perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)
+	cd ..\win32
+
+test_porting : test-prep
+	cd ..\t
+	perl.exe harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t
+	cd ..\win32
+
+test-reonly : reonly utils
+	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
+	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
+	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+	cd ..\t
+	perl.exe harness $(OPT) -re \bre\\/ $(EXTRA)
+	cd ..\win32
+
+regen :
+	cd ..
+	regen.pl
+	cd win32
+
+test-notty : test-prep
+	set PERL_SKIP_TTY_TEST=1
+	cd ..\t
+	perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)
+	cd ..\win32
+
+_test : 
+       $(XCOPY) $(PERLEXE) ..\t\$(NULL)
+       $(XCOPY) $(PERLDLL) ..\t\$(NULL)
+       $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+       cd ..\t
+       perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)
+       cd ..\win32
+
+_clean :
+	-@$(DEL) miniperlmain$(o)
+	-@$(DEL) $(MINIPERL)
+	-@$(DEL) perlglob$(o)
+	-@$(DEL) perlmain$(o)
+	-@$(DEL) perlmainst$(o)
+	-@$(DEL) config.w32
+	-@$(DEL) config.h
+	-@$(DEL) ..\git_version.h
+	-@$(DEL) $(GLOBEXE)
+	-@$(DEL) $(PERLEXE)
+	-@$(DEL) $(WPERLEXE)
+	-@$(DEL) $(PERLEXESTATIC)
+	-@$(DEL) $(PERLSTATICLIB)
+	-@$(DEL) $(PERLDLL)
+	-@$(DEL) $(CORE_OBJ)
+	-@$(DEL) $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS)
+	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
+	-if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
+	-if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
+	-@$(DEL) $(UNIDATAFILES)
+	-@$(DEL) $(WIN32_OBJ)
+	-@$(DEL) $(DLL_OBJ)
+	-@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
+	-@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
+	-@$(DEL) *.ilk
+	-@$(DEL) *.pdb
+	-@$(DEL) Extensions_static
+
+clean : Extensions_clean _clean
+
+realclean : Extensions_realclean _clean
+
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, use "nmake nok" instead.
+ok: utils
+	$(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)"
+
+okfile: utils
+	$(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
+
+nok: utils
+	$(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)"
+
+nokfile: utils
+	$(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok